No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The USG2130 Pushes the Web Page of TSM Authentication

Publication Date:  2012-07-27 Views:  3 Downloads:  0
Issue Description
In an office, the USG2130 is deployed for interworking with the TSM. The Web authentication page is released through the USG2130, but the PC cannot receive it.
Alarm Information
None.
Handling Process
Initially, the USG5000 authentication page configuration mode is adopted, and then it is changed to ACL control Web authentication page. The release is normal, and the terminal can receive the Web authentication page for authentication.
[USG2130] acl 3000
[USG2130-acl-adv-3000] rule permit ip source 10.1.1.0 0.0.0.255
[USG2130-acl-adv-3000] quit
[USG2130] firewall zone trust
[USG2130-zone-trust] firewall authentication session-based 3000 outzone
USG2130-zone-trust] quit
Root Cause
According to the analysis of packet capture, the USG2130 does not release the Web authentication page.
Suggestions
If this problem occurs, you can locate the fault through packet capture and push a Web page in ACL mode.

END