No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Specification limits lead to the WS6603 can create a new address pool, but cannot add new IP address segment

Publication Date:  2012-09-28 Views:  83 Downloads:  0
Issue Description
WS6603 can create a new address pool, but the corresponding address segments can not be added, report as follows:

  TJ-ZSM-WS6603(config-ip-pool-dagangshenglijie)#section 0 125.36.70.2 125.36.70.126
  %The number of IP addresses cannot be greater than 4096
Alarm Information
The number of IP addresses cannot be greater than 4096

Handling Process

1. Check the address pool IP segment settings is no problem.
2. Configure multiple address pool appellation. Confirm the address pool is in the equipment allowable range.
3. The new address pool was reduced to 30, be able to add successfully. Delete and then add the address to 50, the alarm still. Repeated test, it added successfully when setting max number of the address is 48.
4. Taking into account the equipment already had 33 address pools, for each address pool to 0.5 or 1 Class C. Calculate the total number of addresses is close to 4K. Delete one class C address pool had been configured but not used, add the above ip-pool-dagangshenglijie 0.5 Class C address, added successfully, the problem is solved.
Root Cause
1. The address pool IP segment configuration error
2. The address pool number is limited
3. The device is limited in the number of IP address pool
Suggestions
WS6603 supports up to 1K AP, WS6603 as DHCP SERVER address pool specifications 4K.

END