No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

USG5300 two-node cluster hot backup synchronize configuration policies sequence synchronization inconsistent.

Publication Date:  2012-10-10 Views:  42 Downloads:  0
Issue Description
Two the USG5330 did two-node cluster hot backup, but after synchronized configuration, found policies sequence inconsistent, as follows
USG5330 A
policy interzone mlifang_server untrust outbound
policy 0
action permit
 
policy 6
action permit
policy service service-set backup
 
policy 3
action permit
policy service service-set icmp
policy service service-set telnet
 
USG5330 B
policy interzone mlifang_server untrust outbound
policy 6
action permit
policy service service-set backup
 
policy 3
action permit
policy service service-set icmp
policy service service-set telnet
 
policy 0
action permit
Alarm Information
None
Handling Process
First “undo hrp auto-sync config” in the main and backup devices, then delete the configuration on the backup device. And then in the main and backup device configure “hrp auto-sync config”, then execute “hrp sync config” in the main device to do configuration manual batch backup.
 
After testing, the synchronization configuration is normal.
Root Cause
1. Check the configuration, have no problem.
2. Suspected the client has done configuration before two-node cluster, so cause the synchronization problems. Confirmed with the client found they have configured policies on the backup device before configuring two-node cluster.
Suggestions
The two-node cluster hot backup synchronization configuration have problems, many of which are due to have done configuration on backup device before doing two-node cluster, you can refer to the above steps to resolve.

END