No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Access point report that the "detection results" is in "not analysis" state

Publication Date:  2012-10-11 Views:  52 Downloads:  0
Issue Description
Ap report that the "detection results" is in "not analysis" state.
Alarm Information
None.
Handling Process
Reason 1: db-daemon is analyzing detection results.
1. Inquire the detection results again, check whether the detection results of "not analysis" state are reduced.

If the detection results of "not analysis" state reduced, it said that the db-daemon is analyzing detection results, please wait for db- daemon analysis completed.
If the detection results of "not analysis" state didn’t reduce, please continue check the reason 2.
Reason 2: db-daemon processes anomaly.
1. Login background server, perform commands ps-ef | grep db-daemon, check whether the process of db-daemon is normal.
  #ps -ef | grep db-daemon
  root 818 1 0 2008 ? 00:00:00 /usr/local/SIG/DB/db-daemon
  root 30514 818 0 Jan13 ? 00:00:00 /usr/local/SIG/DB/db-daemon
The display results related with db-daemon related should have two lines.
If db-daemon process is normal, please contact technical support engineer.
If db - daemon process is abnormal, please implement command “/etc/init.d/db-daemon restart”, restart process. And then executive command “ps -ef | grep db-daemon”, check whether the process starts normally.
Root Cause
The possible reasons lead to the failure are:
Reason 1: db-daemon is analyzing detection results.
Reason 2: db-daemon processes anomaly.
Suggestions
None.

END