No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Eudemon8080E SPU borad cannot register after upgrade because of the license limit

Publication Date:  2012-10-18 Views:  59 Downloads:  0
Issue Description
After Eudemon8080E from V100R001C01SPC003 upgrading to V100R002C00SPC100, SPU board cannot register.
The alarm information:
2010-05-17 15:39:47 Eudemon %%01SRM/4/LPUOFFLINE(l): LPU3 is offline, the reason
is: LPU Offline is down!                                                      
2010-05-17 15:39:47 Eudemon %%01SRM/5/PWROFF(l): Power off SPU. Num of SPU Board
is Limited by License. 
Alarm Information
None.
Handling Process
1、 Other board can register normally, only the SPU board cannot register, so we can remove the problem of failing to version upgrade.
2、 Rollback the version to V100R001C01SPC003, SPU board can register normally, so it is not the problem of SPU board hardware.
3、 Analyse the log, we can find it is led by license, the license controls the registration of SPU board in the E8000E V100R002 version, if it doesn’t load License, SPU board cannot register but V100R001 version can register.
So after firewall from V100R001 version upgrading to V100R002 version, it will appear this problem.
Root Cause
1、 Failing to version upgrade
2、 The problem of SPU board hardware.
3、 Software correlation problem
Suggestions
Eudemon8000E from V100R001 version upgrading to V100R002 version, if it has SPU board, it need advance to apply License , after loading License on the firewall ,SPU can register normally. When we apply License ,we need notice according to the number of the live network firewall SPU to fill in the corresponding cost information in the License.

END