No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to use the Debugging tools

Publication Date:  2012-10-25 Views:  85 Downloads:  0
Issue Description
How to use the Debugging tools and how to check the Debugging information are very important to maintenance engineer when they deal with failures.
Alarm Information
None.
Handling Process
Debugging information switch
Before open the debugging switch, need analysis fault phenomena, judge the modules need to be debugged.
Open the debugging switch will affect equipment performance. Only when needs to locate fault, it is necessary to open the debugging switch, and cannot be used for monitoring of normal network operation.
Please careful use the debugging switch with the key word “all”. After the debug, should implement the “undo debugging all” command to close all debugging switches. Use it in the slack period of network as far as possible, in order to reduce the influence of the debugging command to system.
Note: In user view execute debugging can open the designated debugging information, such as to open ICMP debugging switch:
terminal debugging
Info:Current terminal debugging is on

terminal monitor
Info:Current terminal monitor is on

debugging ip icmp
Use display debugging command can view opened what debugging switch.
display debugging
OSPF global debugging state:
OSPF EVENT debugging is on
OSPF LSA debugging is on
ARP packet debugging is on
Socket-Monitor:
IP icmp debugging is on

Debugging information format
Debugging information start with symbol "*",
Root Cause
Debugging command is an important tool to system maintenance engineer maintenance equipment, locate fault. In the network equipment failure, the system maintenance engineer through open Debugging command switch, can track the operation process of the business and find the cause of the problem.
Debugging tools need the users have certain technical basis, compared with display methods it is much easier to find the fault appeared in protocol interaction.
Suggestions
For a post sales engineer, can very skilled use the Debugging tools is very important to advance their own problems handling ability.

END