No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How to resolve the problem that the slow initialization of LUN?

Publication Date:  2012-11-02 Views:  32 Downloads:  0
Issue Description
Some site deployed a site, the Operating System is Windows 2003 R2 Chinese version. After the S5600T had configured the LUN (V100R001C00), and the mapping is normal. However , the customer reflected that the speed of the initialization is slow, and it didn’t have completed this process for 24 hours.

Alarm Information
None
Handling Process
Configured the port into the switch mode, then the initialization was normal.
Root Cause
After checking out, we found that there is intermittent disconnection in the front link, which site is the switch group network, we considered the reason is the port connected the array and the switch hadn’t been in the switch mode, and there was problem about the compatibility, then appeared the intermittent disconnection, and caused the slow speed of the LUN formatting.
Suggestions
In the condition of the switch group network, the port of the front array must be set as the switch mode.

END