No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TSM software version and firewall version are not delivery-attached causes the access control effect is not well

Publication Date:  2012-11-22 Views:  45 Downloads:  0
Issue Description
A site testing uses the TSM version of V1R2 version, hardware firewall uses a formal release version which supports SACG. After completed the installation and debugging, appears the phenomenon: after through the authentication, when ping a web server of post-authentication domain, the access control effect is normal. Although can ping the server, but cannot open the web interface.
Alarm Information
None.
Handling Process
Upgrade the firewall version which is not in delivery-attached table to matched version, in order to guarantee the stability of the system.
Root Cause
According to the version delivery-attached table inquires:
Eudemon 100E/200S only supports routing model, version: V200R007C03SPC001 Eudemon 200 only supports routing model, version: V200R001C03SPC001
Eudemon 300/500/1000 supports routing model/transparent mode at the same time, version: V200R006C02SPC001
USG2130 only supports routing model, version: V100R002C01SPC002
USG2220/2250 supports routing model/transparent mode at the same time, version: V100R002C01SPC006
USG5320/53305350/5360 supports routing model/transparent mode at the same time, version: V100R002C01SPC006
According to the version delivery-attached table: TSM software’s V1R2 version has demands to the corresponding firewall version.
Suggestions
It is suggested that the frontline engineers in strict accordance with the requirements upgrade the firewall to the matching version when testing or delivering, in order to avoid accidents.

END