No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The location of the N8300 node memory has been configured incorrect causes the system can’t start automatically.

Publication Date:  2012-12-04 Views:  28 Downloads:  0
Issue Description
There haven’t the monitor and the mouse in the N8300 standard configuration, after the system powering on, it will start automatically to wait to add into the “cluster” status, but the location of the node server memory is incorrect, which causes the N8300 node can’t start automatically successfully, we need to diagnose the problem by monitor and mouse.
While connecting the monitor and mouse, we find the location configuration of the server memory is not the optimal, the system will stay at the interface before the OS has started.
Alarm Information
None
Handling Process
According to the prompts in the above picture, adjust the original configuration A2 A5 A3 A6 as to A1 A4 A2 A5, then the system can start the OS normally.

Root Cause
The location of the server memory is incorrect, which causes the system staying at the interface before the OS has been started while the system starting or restarting.

Suggestions
None

END