No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The P2P flow displayed in SIG flow analysis is ten times of the flow displayed under P2P module

Publication Date:  2012-12-05 Views:  55 Downloads:  0
Issue Description
In the flow analysis of SIG management’s home page, viewed the P2P total flow is 6G or so; but in P2P management module, the P2P total flow is only 400M or so.
Alarm Information
None.
Handling Process
Land the server, use vi tool modify P2P SAS configuration files, adjust the user number greater than the actual user number, and then restart the SAS.
Root Cause
The circumstance is due to when installing P2P module, the set user number is less than the actual user number of the live network. Displayed correctly at the home page is based on the total flow analysis results, but under the P2P module requires corresponds the P2P flow respectively to different user nodes and then displays statistical analysis results, if the set user number is less than the actual user number, it will lead to part of the P2P flow be discarded, the result is the P2P flow displayed under P2P module is less than the actual flow.
Suggestions
When setting installation parameter, be sure to confirm the network information of the live network with the user.

END