No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-how to check the user’s has been pushed advertisement in SIG system

Publication Date:  2012-12-14 Views:  33 Downloads:  0
Issue Description
Q:
How to check the user’s has been pushed advertisement in SIG system?
Alarm Information
None.
Handling Process
A:
The following method only applied for the pre-V100R002C06 version.
First of all we need to acquire the IP address when the user online, because the SIG is in accordance with the IP flow to determine whether the user has online. Assume the user’s IP is x.x.x.x, then we can yin the user’s SPS area through the command behavshowipinfo "x.x.x.x" to view the user’s information, if the display is “no such IPvalue = 1 = 0x1”, namely the user’s flow hasn’t passed though the SPS, use the same method until the other SPS display the following information:
Area        :6
****AD****
   ID       :0
RefreshTime :0
LiveTime    :0
Is Enable   :0
****Flow*****
****Flow in old*****
****Intrest*****value = 0 = 0x0
Namely SPS has detected flow of the user’s IP, repeat to check the user until it displays:
Area        :6
****AD****
   ID       :211
RefreshTime :1250155443
LiveTime    :300
Is Enable   :1
****Flow*****
****Flow in old*****
****Intrest*****value = 0 = 0x0
Pay attention to the IS Enable value, if it is 1, namely the IP has associate the advertisement, if it is o, namely the advertisement has completed to push.
Root Cause
None.
Suggestions
In the testing that carrying on the advertisement push, uses this method can position the problem fleetly.

END