No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to config iscsi initiator on HP-UX

Publication Date:  2013-03-04 Views:  59 Downloads:  0
Issue Description
Map S5500T luns to HP-UX via iscsi, need to install and config iscsi initiator on system.
Alarm Information
no
Handling Process
The installation program of the iSCSI initiator is named *.depot on the HP-UX application server. iSCSI-00_B.11.31.01_HP-UX_B.11.31_IA+PA.depot for example.

Run the swlist iSCSI-00 command, and the ioscan -NkfnC iscsi command to check whether the iSCSI initiator is installed on the HP-UX application server.
If the iSCSI initiator driver is installed, the following information is displayed.
#swlist iSCSI-00
# Initializing...
# Contacting target "hp002"...
#
# Target:  hp002:/
#
# iSCSI-00              B.11.31.01     HP-UX iSCSI Software Initiator
  iSCSI-00.ISCSI-SWD    B.11.31.01     HP-UX iSCSI Software Initiator
# ioscan -NkfnC iscsi
Class     I  H/W Path   Driver S/W State   H/W Type     Description
===================================================================
iscsi     0  64000/0x0  iscsi   CLAIMED     VIRTBUS      iSCSI Virtual Root
If the iSCSI initiator driver is not installed, the iSCSI initiator information is not displayed.
If the iSCSI initiator driver is not installed on the HP-UX application server, download it from http://www.software.hp.com, and then install it by following its installation wizard.

Root Cause
no
Suggestions
no

END