No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Node 2 is damage in N8300

Publication Date:  2013-08-23 Views:  88 Downloads:  0
Issue Description
The Node 2 is offline, is not possible access to this node.

Alarm Information
is not possible acces to the node 2
the node 2 has an alarm








Handling Process
  • E2022 General failure during post-----this is caused by the memory, so we need to pull out and plug in all the memory
  • E171F PCIe fatal error by device 0 function 0-----this is caused by the FC HBA card, so we need to pull out and plug in the FC HBA card(which is with the red led)
  • E1422 CPU1 machine cheek error. power cycle AC-----this is also related with the memory, we need to pull out and plug in all the memory
  • When we checked the Memory and FC HBA card, the server can’t start yet. So we need to replace the main board this time.
Root Cause
  • E2022 General failure during post-----this is caused by the memory, so we need to pull out and plug in all the memory
  • E171F PCIe fatal error by device 0 function 0-----this is caused by the FC HBA card, so we need to pull out and plug in the FC HBA card(which is with the red led)
  • E1422 CPU1 machine cheek error. power cycle AC-----this is also related with the memory, we need to pull out and plug in all the memory
Suggestions
None

END