No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The correct command format of SNMPwalk for S5500T

Publication Date:  2014-09-20 Views:  61 Downloads:  4
Issue Description
Version:
V100R005C00SPC500
Symptom:
     SNMPwalk returns no response when SNMP function of S5500T

[root@lnagiosb ~]# snmpwalk -mALL -v2c -cpublic xxx.xxx.xxx.xxx
Timeout: No Response from xxx.xxx.xxx.xxx
[root@lnagiosb ~]# snmpwalk -mALL -v1 -cpublic xxx.xxx.xxx.xxx
Timeout: No Response from xxx.xxx.xxx.xxx
Alarm Information
no alarm
Handling Process
Command should contain the Community Name. cpublic is just a parameter, it should be replaced by Community Name which can check with CLI command showcommunityname
Root Cause
SNMPwalk command format is not correct.
Suggestions
So in this case the correct command should be
snmpwalk -mALL -v2c –storage_public xxx.xxx.xxx.xxx

END