No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei Storage S5600T Safe mode

Publication Date:  2014-08-28 Views:  47 Downloads:  0
Issue Description
Demo unit Huawei Storage S5600T stuck in Safe mode .
Alarm Information
No alarm.
Handling Process
After investigatiing , i found out that the controller B was not powering on properly due to the power loss . 
Root Cause
After some power issues with the environment , the safe mode issue appeared.
Suggestions
Please try to remove both controllers from the enclosure and wait for 30 seconds. After that please insert controller  and wait for 5 minutes . After that please power the system on and see if this works fine . If it does then insert the other controller. This solved the problem. Both controllers powered on OK.

END