No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

No NL SAS / SATA hot spare disk exists in the storage system

Publication Date:  2015-01-30 Views:  113 Downloads:  0
Issue Description


The customer  didn’t configure the hot spare disk and the system gave him the warning showed in the picture  also the system  showing a red triangle at the storage controller in ISM  a warning message.

 

This warning is pressent in event logs.

As we can see in Disk key info picture  all the disks are member and the customer don’t have a hotspare disks. It’s much beter to have several hotspare disks, If you have possibility  add minimum one hotspare disk for 12 member disks. Don’t change the actual type from Membar to Hotspare,   add few disks in your system like a hotspare  but don’t chenge the “type” from existing disks.

 

 We recommend to have several  hotspare disks for safety in storage system. This configuration without hotspare disks is not recommended.

Solution

This allarm was automticaly cleared in ISM.

We recommend to have several  hotspare disks for safety in storage system. This configuration without hotspare disks is not recommended.

END