No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

System Disk Is Faulty or Removed

Publication Date:  2015-01-30 Views:  155 Downloads:  0
Issue Description

 

The customer received this alarm in ISM  "System Disk Is Faulty or Removed"

After I checked event logs I found that the SYSTEM DISK 1 is faulty. This disk must to be replaced asap.

 
A replacement  with a new disk is mandatory - asap.


Solution

 

Replace the faulty disk asap.

The two system disks cannot be removed simultaneously. If both system disks are removed, the device can’t work correctly.

After a system disk is replaced by a new system disk m data on the new disk will be reconstructed . the reconstruction process take few hours (about 2 hours). During the reconstruction, do not remove the normal system disk, otherwise the device can’t work correctly.


When removing a system disk module, disconnect the connector first and wait 30 seconds before removing it from the chassis.

END