No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

"F/W is in Fault State" Is Displayed for the LSISAS 2208 Controller Card

Publication Date:  2015-06-18 Views:  88 Downloads:  0
Issue Description
Hardware configuration:
A RH2285 V2 with an LSISAS2208 controller card

Symptom:

F/W is in Fault State (the MFI error code is not unique) is displayed in the RAID self-check phase during server startup. The RAID controller card initialization cannot complete, and hard disks cannot be detected, as shown in Figure 1.

Figure 1 F/W is in Fault State displayed during the LSISAS2208 controller card self-check

Handling Process
Replace the RAID controller card.

Root Cause
"F/W is in Fault State" is displayed during the RAID controller card self check, the RAID controller card initialization cannot complete. As a result, the RAID controller card cannot be detected.

END