No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The MM910 Administrator Password Is Forgotten

Publication Date:  2015-06-24 Views:  219 Downloads:  0
Issue Description
Hardware configuration:
E9000 server

Symptom:

The default administrator password of the MM910 is changed, but the new password is forgotten.
Handling Process
1.  Log in to the MM910 U-Boot. For details, see the E9000 MM910 Management Module Installation Guide.

2.  Run the following commands in sequence to restore the default password:
  • pwdclr (This command is used to restore the default password.)
  • saveenv (This command is used to save the setting.)
  • reset (This command is used to restart the server.)
3.  After the restart, run the following commands in sequence to set a new administrator password:
  • setenv passwd (This command is used to set a new password.)
  • saveenv (This command is used to save the setting.)
  • reset (This command is used to restart the server.)
Solution
Log in to the MM910 U-Boot, restore the default administrator password, and set a new administrator password immediately.

END