No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The NX220 Cannot Be Accessed over HTTP

Publication Date:  2015-06-25 Views:  44 Downloads:  0
Issue Description
Hardware configuration:
A E6000 V2; an NX220 configured for the B1 switching plane

Symptom:

Log in to the management module web user interface (WebUI) using a client, choose System Management > Network Management > NEM > Manage IP Address, set the management IP address of the NX220 for the B1 switching plane to 10.77.77.77 and subnet mask to 255.255.255.0, as shown in Figure 1.

Figure 1 Management module WebUI



2.  Open Internet Explorer on the client (IP address: 10.77.77.89) and enter http://10.77.77.77 in the address box to access the NX220. A message is displayed indicating that the interface of the client is disabled, as shown in Figure 2.

Figure 2 Restricted access to the NX220 over HTTP

Handling Process
Access the NX220 over HTTPS by entering https://10.77.77.77 in the address box of the browser.

Root Cause
The HTTP port on the NX220 is disabled before delivery. You need to access the NX220 over HTTPS.

Suggestions
Port disabling of the NX220 is as follows:

1.  File Transfer Protocol (FTP) is disabled. Use Secure File Transfer Protocol (SFTP) instead.

2.  Telnet is disabled. Use Secure Shell (SSH) instead.

3.  HTTP is disabled. Use HTTPS instead.

END