No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Files on the HDP3500E Fail to Be Restored (Status 2008)

Publication Date:  2015-07-29 Views:  30 Downloads:  0
Issue Description
Files cannot be restored on the HDP3500E. On the Task Progress tab page, the error message No space left on device is displayed, as shown in Figure 1.

Figure 1 Progress information on the Task Progress tab page





After details about the backup job are checked, it is found that the error message Standard policy restore error (2800) is displayed, as shown in Figure 2.

Figure 2 Details about the backup task



Handling Process
Clear data in the space to be restored and ensure that sufficient space can be used for file restoration.
Root Cause
Possible Causes:

The remaining space of the client is insufficient.

Fault Diagnosis:
Check the space usage of the host.

1.  Log in to the client as user root.

2.  Run the df -lh command to check the space usage of the host.

Filesystem            Size  Used Avail Use% Mounted on
/dev/sda3              56G   56G     0 100% /
udev                 1007M  180K 1006M   1% /dev
/dev/sda1              99M   14M   80M  15% /boot


In the preceding command output, you can find that the space of /dev/sda3 where files restore has been used up. Therefore, files cannot be restored.

END