No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to mute local site audio without muting presentation audio on TE60 when sharing presentation to remote site?

Publication Date:  2015-12-10 Views:  98 Downloads:  0
Issue Description

How to mute local site audio without muting presentation audio on TE60 when sharing presentation to remote site?
TE60 version: V100R001C10SPC100 and newer

Solution

1. The Prerequisite is sending presentation with both video and audio;  To make it, it's needed to do the following operation on TE60:
    a. Use HDMI IN port on TE60 to connect the presentation source which is usually a Laptop with HDMI OUT port.
    b. Set Input source of HDMI IN on TE60 to be HDMI; (In the WEB GUI Page: System Settings->Input/Output->Video Input) 

          

    c. Select Presentaton source to be HDMI; (In the WEB GUI Page: Device Control->Video Control->Local Video Settings) 
      
2. The audio of local site and presentation will be sent to remote site in one audio channel when sharing presentation; To mute local site audio without influencing presentation audio, we have to control their audio separately on TE60 by change this settings(as the pic shown below) :
    Select Switch controls to be MIC array only. (In the WEB GUI page: System Settings->Input/Output->Audio) 
    
    After that, the control of audio on TE60 was separated, you can mute local site without muting presentation audio when sharing presentation to remote site.

END