No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T-how to make a QinQ configuration

Publication Date:  2016-04-12 Views:  108 Downloads:  0
Issue Description
Customer wants to make a QinQ configuration in order to transfer all the flux from user side to switch.
Alarm Information

customer make a wrong configuration ,so the function was unavailable.

Handling Process
customer make a wrong configuration ,so the function was unavailable.

based on the requirement of customer that :transfer all the flux from user side to switch.,
we give the configuration example like below:

ont-srvprofile gpon profile-id 1

  ont-port eth 1

  port q-in-q eth 1 enable

  port vlan eth 1 translation10 user-vlan 10 

  commit

 

ont-lineprofile gpon profile-id 1

  qos-mode gem-car

  mapping-mode port

  tcont 1 dba-profile-id 10

  gem add 0 eth tcont 1

  gem mapping 0 0 eth 1

  commit

  quit

 

vlan 20 smart

port vlan 20 0/2 1

 

ont port native-vlan 0 1 eth 1 vlan 20

 

service-port vlan 20 gpon 0/0/0 ont 1gemport 0 multi-service user-vlan 20 tag-transform translate


Root Cause
based on the requirement of customer that :transfer all the flux from user side to switch.,
we give the configuration example.
the orignal configuration of customer is wrong cause the function was unavailable.
Solution

based on the requirement of customer that :transfer all the flux from user side to switch.,

we give the configuration example like below:

ont-srvprofile gpon profile-id 1

  ont-port eth 1

  port q-in-q eth 1 enable

  port vlan eth 1 translation10 user-vlan 10    

  commit

 

ont-lineprofile gpon profile-id 1

  qos-mode gem-car

  mapping-mode port

  tcont 1 dba-profile-id 10

  gem add 0 eth tcont 1

  gem mapping 0 0 eth 1

  commit

  quit

 

vlan 20 smart

port vlan 20 0/2 1

 

ont port native-vlan 0 1 eth 1 vlan 20

 

service-port vlan 20 gpon 0/0/0 ont 1gemport 0 multi-service user-vlan 20 tag-transform translate


Suggestions
this is only a configuration examle , different requirement ,the configuration maybe have a little difference .

END