No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SmartAX MA5603T - question about user-bridge

Publication Date:  2016-04-12 Views:  57 Downloads:  0
Issue Description
customer undertand that the traffic is as default isolated between the terminals (ONT).When we have an ONT as L2 and behind it a host. Then cannot communicate to other ONT on the same/another port/board.But when we have an ONT as L3 with WAN interface than can communicate to another ONT.Would you like to tell me how it happened?How goes the traffic?I am a little bit confused.
Alarm Information

customer can ping another host in one ONT from another ONT , in default that would not happen , as user bridge is disable in default .

Handling Process
we collet information about how customer do this operation ,and found that ,in this issue , customer ping another ONT ,from the web page of the ONT,instead of the host .
customer make test by himself 

there are 2 ONT, and 2 hosts, for example host1 is under ONT1,host2 is under ONT2
1.host1 can't ping host2
2.if ping through the web page of ONT1, he can ping the host2.

after analisys , we think it's a normal appearance.

1.when host to host , the traffice is in L2, when user bridge is disable, the traffice is disconnect.

2.but when ping from the web page of ONT, the traffice will go the gateway of OLT(through wan port and go SCUN board),then package will go L3, and can reach host2.
Root Cause

the different operation have different result.

when ping from the web page of ONT, the traffice will go the gateway of OLT(through SCUN board),then package will go L3, and can reach host2.

Solution
this is a normal appearance. different result based on differnt operation .host is isolated between different ONTs in default that the user bridge is disable.
Suggestions

when ping from the web of ONT, package will go to WAN port and go through gateway of L3.

END