No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fail to boot into Windows Server 2012 R2 after being installed

Publication Date:  2016-04-20 Views:  203 Downloads:  0
Issue Description

After The OS has been installed on the RH1288 V3 server, the server doesn't boot up into OS 


 


Solution

Checked the RAID configuration on the RAID controller => the RAID 1 level was properly configured

When configuring RAID, it is mandatory to set the boot option from BIOS


1. Go on the Adapter Properties screen, select SAS Topology and press Enter.

2 Use ↑ and ↓ to select a drive or RAID array, and press ALT+B to set the selected device as the first boot device.


3 Press Esc to exit the current screen.

4 On the confirmation screen, select Save changes then exit this menu and press Enter.


END