No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to config the management IP address in the same network segment with service IP

Publication Date:  2016-04-26 Views:  168 Downloads:  0
Issue Description

Device Model:5500 V3 Version:V300R003C00 Patch Version:SPC100


The management IP should be from the same segment with all the IP addresses, the customer can not set the management IP from another network segment.

An error occured when our client tried to set the management  IP from the same network segment.

 


Many customers do not have a separate network management and production network. 

 

Solution

  We can configure management network and production network in the same subnet. Please follow the step below:

1.       Login CLI command line;

2.       Execute command “change user_mode current_mode user_mode=developer” and enter developer mode;

3.       Execute command “change port eth_network_segment switch=on” to enable the switch.

 

In below we have an example from CLI for how to do that:

 

login as: admin

 

Authorized users only. All activities may be monitored and reported.

Using keyboard-interactive authentication.

password:

 

WARNING: You have accessed the system.

You are required to have a personal authorisation from the system administrator                                                                                         before you use this computer. Unauthorised access to or misuse of this system is                                                                                         prohibited.

 

 

  System Name     : Huawei.Storage

  Health Status   : Normal

  Running Status  : Normal

  Total Capacity  : 22.946TB

  SN              : 21023xxxxxxxxxxxxxxx

  Location        :

  Product Model   : 5500 V3

  Product Version : V300R003C00

  Time            : 2016-04-06/21:51:08 UTC+08:00

  Patch Version   : SPC100

 

admin:/>change user_mode current_mode user_mode=developer

Command is executable now.

developer:/>

developer:/>change port eth_network_segment switch=

<switch=?>          Whether service IP addresses and management IP addresses can reside in the same network segment.

switch=on           switch=off

 

developer:/>change port eth_network_segment switch=on

DANGER: You are about to set management IP addresses and service IP addresses on the same network segment. This operation may cause services that actively connect to external servers unavailable. Such services include SNMP, syslog, email, FTP, AD, NIS, LDAP, and DNS.

Suggestion: Before performing this operation, ensure that service IP addresses and management IP addresses must be set on the same network segment.

Have you read danger alert message carefully?(y/n)y

 

Are you sure you really want to perform the operation?(y/n)y

Command executed successfully.

 

Please note that  the function is  only supported by V300R002C10SPC200 and V300R003C00SPC100, or later version.

 

END