No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S9300 V200R001C00SPC300 fail to use the configured traffic-mirror policy

Publication Date:  2016-06-27 Views:  673 Downloads:  0
Issue Description
S9300 V200R001C00SPC300 configuration of traffic-mirror:

#

observe-port 2 interface Eth-Trunk34

#

acl number 3010

rule 1 permit tcp destination-port eq www

rule 2 permit tcp destination-port eq 8080

#

traffic classifier c1

if-match acl 3010

#

traffic behavior b1

permit

mirroring to observe-port 2

#

traffic policy p1

classifier c1 behavior c2

In the interface Eth-Trunk1, fail to configure "traffic-policy p1 outbound".
Alarm Information
Error: Check rule failed, policy p1, class c1, behavior b1 acl 3010, rule 1, on slot 3 interface Eth-Trunk1.
Handling Process

1. Check the configuration of ACL, traffic-classifier,traffic behavior and traffic-policy.

2. In the configuration of traffic behavior, there is an unnecessary command "permit".

3. Remove the "permit" command and test.

4. Error disappeared.

Solution
Delete the configuration "permit" in the traffic behavior b1
Suggestions
Because in S9300 V200R001C00, there is a default configuration of "permit" in the traffic behavior.When configure other behaviors of the traffic-mirror, the traffic policy will fail to use in the interface.

END