No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCube R2C50SPC200 initialization failed

Publication Date:  2016-07-07 Views:  123 Downloads:  7
Issue Description
Failed to initial FusionCube R2C50SPC200 blade nodes, remind the VRM float IP conflict. 
Alarm Information



Handling Process
1.Check the VRM ip in VM,it is 10.100.1.118,configuration is correct,and arping VRM float IP from FCC VM succeed..

2. Go to the FCC portal ,check all the components IP and mask, find the mask of VRM and MCNA are 24bit by default, but actually the planning mask is 21bit.

3. Change the mask of VRM and MCNA01 ,MCNA02.
4.After changed the mask of VMR and two MCNAs, then go to the initial portal, try it again, it’s succeed.
The system can recognize the correct float ip of VRM automatically.


Root Cause

The FusionCube R2C50SPC200 version set the 24 bit mask of management IP segment by default, so when the planning IP mask is not 24bit.some problems will happen.

Solution

Change the mask of VRM and other management nodes to correct ones.

END