No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Install License Failure

Publication Date:  2016-10-27 Views:  4645 Downloads:  0
Issue Description
custom said that they Install commercial License  Failure
Alarm Information

%%INS LICENSE:
DIR="/", FN="LICDBS3900LTETDDV100R008_20160921ADKI6T.xml",
FLG=YES, MODE=IPV4, IP="10.1.105.10", USR="anonymous",
PWD="*****";%%

RETCODE = 839974950  Progress report, The license file to be downloaded has the same file name as the current
license file on the BS.

Report Type  =  Install License

Status =  Failure

Session ID  =  65644



 



Handling Process

1,check the license current status used command DSP LICINFO, the result as below

%%DSP LICINFO:;%%RETCODE = 0  Operation succeeded.

NE License Status

-----------------           
Status  =  Grace Period

Enter Grace Period  = 2016-09-27

(Number of results = 1)

Info of NE License

------------------

Operator Index  Operator Name Model      Description                      Allocated  Config  Actual Used Unit                   Expiration Date

65535   SHARED         LT1ST05MHZ00 Carrier Bandwidth -0~5MHz(TDD)          3         3      3            per Cell               PERMANENT      65535          
SHARED         LT1ST10MHZ00 
Carrier Bandwidth -
5~10MHz(TDD)         
3        
 3      
3            per
Cell               
PERMANENT     



65535          
SHARED         LT1ST15MHZ00 
Carrier Bandwidth - 10~15MHz(TDD)        
3         
3      
3            per
Cell               
PERMANENT     



65535          
SHARED         LT1ST20MHZ00 
Carrier Bandwidth -
15~20MHz(TDD)        
3         
3      
3            per
Cell               
PERMANENT     



65535          
SHARED         LT1ST00SUE00 
Support of UE
Category2/3/4(TDD)         
300        300    
5            per RRC
Connected User  PERMANENT     



65535          
SHARED         LT1SUMMLFL01  UBBP
First-Mode
license(TDD)             
1          1      
1            per
UBBP               
PERMANENT     



65535          
SHARED         LT1ST000PA00  RF
Output Power(TDD)    
                 1         
1      
1            per
20W                
PERMANENT     



65535          
SHARED         LT1STD2I2O00  DL
2x2
MIMO(TDD)                         
3          3      
3            per
Cell               
PERMANENT     



65535  
        SHARED        
LT1STBASIC08  eNodeB TDD Basic Software, V100R008(TDD) 
3          3      
3            per
Cell               
PERMANENT     



65535          
SHARED         LT1S0TRFTC00  RF
Transmit
Channel(TDD)                 
2         
2     
 2            per
Channel            
PERMANENT     



65535          
SHARED         LT1S0TRFRC00  RF
Receive Channel(TDD)                  
2         
2      
2            per Channel            
PERMANENT     



65535          
SHARED         LT1S000TRB00 
Resource
Block(TDD)                      
300        300    
300          per
RB                 
PERMANENT     



65535          
SHARED         LT1STTHROU00 
Throughput
Capacity(TDD)                 
300        NULL   
0            per
Mbps            
   PERMANENT     



65535          
SHARED         LT1STACTUS00  RRC
Connected
User(TDD)                  
300        NULL    5           
per RRC Connected User  PERMANENT     



(Number of results
= 14)

2,check the Operation record in DBS3900, find custom use command revocation license before

%%RVK LICENSE:;%%RETCODE = 0  Operation succeeded.

result of revoke license

------------------------

 LSN  = LIC20160921ADKI6T

RVKCODE  = 
LIC20160921ADKI6T:A86982BFCF2A2A4CCD8BE4BB648D707DAECFC0B6

RVKTIME  =  2016-09-27 22:48:50

(Number of results = 1)

3, the command RVK license is a high-risk MML command, and therefore exercise caution when
executing this command. Running this command may cause the following major impacts:

[Co-MPT,eNodeB]When the license of an NE is in the normal or commissioning state, the NE license enters the grace period
of 60 days after this command is executed. During the grace period, each control item in the license is executed according
to the current licensed value. After the grace period expires, each control item in the license is executed according
to the default licensed value.

[Co-MPT,eNodeB]When the license of an NE is in the grace period or default state, only the license that is forcibly
installed and does not match the ESN can be revoked by running this command. After this command is executed, a revocation code is obtained for subsequent operations such as ESN change and capacity adjustment. After the license is revoked, the NE license is still in the current
state. Other licenses that are in the grace period or default state cannot be revoked by running this command.

[Co-MPT,eNodeB]This command cannot be executed when the license of an NE is the emergency state.[Co-MPT,eNodeB]When a license file expires, the license file cannot be installed any more. Before running this command, ensure that the license file does not need to be installed on the NE again.

4,regenerate the commercial license in ESDP by revocation code






Root Cause

custom run high-risk MML command RVK license, revoke the current license file on the NE.

Solution
regenerate the commercial license in ESDP by revocation code
Suggestions

exercise caution when executing this high risk command

END