No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

UA5000_ could we configure more than one digit map when LAG working as local switching

Publication Date:  2017-01-06 Views:  79 Downloads:  0
Issue Description
we configured digit map 24xx inside local switching LAG, but customer provisioned telephone line with 2500-2599 and 2600-2699. so once they dial on 2518 they are facing always busy tone.
Alarm Information
There are no new alarm but customer informed by email
Handling Process

add more digit map, like below

1. login to UA5000

2. go to config mode

3. UA5000(config)# interface h248 0

4. UA5000(config-if-h248-0)#digitmap set inner 24xx|25xx|26xx

5. UA5000(config-if-h248-0)#quit

7. UA5000(config)#save

so above of the digit map can support to provision telephone number 2400-2499, 2500-2599 and 2600-2699.

Root Cause
customer did not informed us to provision telephone number starting with 25xx or 26xx, hence we configure only 24xx and later on customer provision  2518 and try to test call but found busy tone, due to digitmap not configured inside UA5000.
Solution
add more digit map, like below

1. login to UA5000

2. go to config mode

3. UA5000(config)# interface h248 0

4. UA5000(config-if-h248-0)#digitmap set inner 24xx|25xx|26xx

5. UA5000(config-if-h248-0)#quit

7. UA5000(config)#save

so above of the digit map can support to provision telephone number 2400-2499, 2500-2599 and 2600-2699.

Suggestions

add more digit map as per customer requirement

END