No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

VMs can't be displayed after VRG system was installed and configured for the UltraVR system

Publication Date:  2017-06-29 Views:  771 Downloads:  0
Issue Description

On the UltraVR portal, after adding the VRG and virtualization system, the VMs can't be displayed when trying to create the protected object as below(no available VMs)

Alarm Information

None

Handling Process

1, Confirm the network between the UltraVR server and VRG is normal

2, Confirm the network between the VRG and the CNA is normal via business plane

3, Checking the storage type of the VMs which need to be added to the protected group, it is FusionStorage

4, For the FusionStorage, the VM need to enable "Block device" on the FusionCompute portal,but it's not enabled on the real environment

Root Cause

If the type of VM disks is FusionStorage, you need to set the block device of the VM to support the FusionStorage storage host replication DR function on the FusionCompute

Solution

Login the FusionCompute and find the related VM, then enable the "Basic Block Storage Settings" as the picture above

Suggestions

None

END