No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ospf peering issue Ne40e

Publication Date:  2017-07-24 Views:  174 Downloads:  0
Issue Description
NE40E not able to advertise OSPF routes to its peer





Alarm Information
no alarm but ospf routes will not be advertised to its peers. even direct routes on routes are not advertised
Handling Process
during troubleshooting , we found that ne40 has limitation of 1000 ospf peers , so if routes are advertised with network command on more than 1000 , it will not advertise beyond 1000 routes
Root Cause
NE40 cannot advertise beyond 1000 routes using network command , for connected routes , "import-route direct" command can be used , then it will work.
Solution

NE40 cannot advertise beyond 1000 routes using network command , for connected routes , "import-route direct" command can be used , then it will work.

 

dont use network command for directly connected network and static routes , use network command only for peering and don't connect more than 1000 routes

Suggestions

dont use network command for network and static routes , use network command only for peering and don't connect more than 1000 routes

END