No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Adding UPS2000G to ECC500

Publication Date:  2017-08-09 Views:  542 Downloads:  0
Issue Description

customer have UPS2000-G in his Data center and need to add it to ECC500 to can monitor it .

Solution

Step 1: Connect the UPS2000-G to ECC500 and must UPS2000-G and ECC500 have been powered on.

Step 2: prepare a PC in the same IP address segment as the ECC500 and connect a PC to ECC500 over switch .

step 3: login into ECC500 WebUI

step 4: choose Home >>> Equipment Manage

Step 5: Select UPS from the Equipment Type drop down box like below screenshot

Note : below screenshot for example indicates the UPS2000-G connected to the COM2 of the RS485 card in Slot 3 of the ECC500 , if you connected to another port , set the slot number for connected port of ECC55.

Step 6: click on Add Equipment.

End....

END