No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

France - FlowLine Technologies - Network - NE20E-S2F - How to configure MQC

Publication Date:  2017-08-10 Views:  761 Downloads:  0
Issue Description
Customer wanted to configure and  apply QoS by subinterface on NE20E device version V8R7.
Solution
Configure HQoS.

there are 3 steps to configure HQoS:

1.configure a flow-queue to set the queue scheduling parameters.

flow-queue fq-Client1

queue af1 wfq weight 10 shaping shaping-percentage 10

queue af2 wfq weight 20 shaping shaping-percentage 20

queue ef pq shaping shaping-percentage 15 low-latency

2.  Defining a QoS Profile and Configuring Scheduling Parameters

qos-profile qp-Client1

user-queue cir 10000 pir 10000 flow-queue fq-Client1

3.apply the QoS profile on a sub-interface

[Huawei-GigabitEthernet0/3/9.1]qos-profile qp-Client1 outbound 

Please note if you have dot1q termination vid x on the sub-interface you will have to add  qos-profile qp-Client1 outbound vlan x.



END