No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40-X8 new LPU not be registered

Publication Date:  2017-09-07 Views:  69 Downloads:  0
Issue Description

Description :

       Added new LPU board into NE40E-X8 . after add board not register and showing abnormal .

   

Alarm Information

Alarm :

Handling Process

1. Check the type of the board is the LPU board, and the software version support this type of board.


2. Check the startup software package file and found that the board boot file is incorrect


<CHN-PE-NE40>check  system-software startup
Error: Read file Head of version file fail.

3. Check the startup system software CRC and found that the system software package contains the CRC error
 
<CHN-PE-NE40>check startup crc
Warning: This operation will take several minutes! Continue?[Y/N]:y
Check startup software CRC
failed
Check startup software CRC in slaveboard
................................................................................................
ok

Root Cause

The master MPU startup file have CRC error and made the board cannot be registered.

Solution

Switchover the slave main-baord to master main-board to solve the problem of board cannot be registered. After switchover the master/slave board, and the software package of slot 10 have CRC problem, and cannot be registered, so upload the new package file again to slot 10 main-board.


  software package file CRC error occurs. As a result, the registration cannot be started.

 

Suggestions

upload new system software package file to main-board.

END