No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

need to remove join and leave Participant leave Sound

Publication Date:  2017-11-19 Views:  57 Downloads:  0
Issue Description

customer has create a conference in SMC and add participants in it. When any participant leave the conference we hear a sound.We need to remove this sound.

Handling Process

we try to use the following commands   

The commands need one by one implementation:

                            <HUAWEI VP9660>system-view

                            <HUAWEI VP9660> conf-policy

                            <HUAWEI VP9660> join-or-left-ivr-ind

join or left ivr ind{0:disable 1:enbale}[1]:  0

Change this value to 0 and save;

We are using the SSH session of the VP9650 MCU by using PuTTY and applying previous commands

We also try to run it as admin from SMC itself, but it give us Bad commandas shown :






Solution

after checking we found to change and modify the IVR of SMC we have to enter this command  " config-policy ivr –ind-switch " .



config-policy ivr –ind-switch . and then press enter until you see the notification that to remove the voice during leaving conference

 as shown Pic :




END