No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei VCN 500 NVR; and I want to publish it; can I assign public IP address to it

Publication Date:  2017-11-30 Views:  99 Downloads:  0
Issue Description
the customer want to mange the vcn500 from the outside from the internet network and he asked how he can give the VCN500 public IP.

VCN500 Version:-V100R002C10SPC100
Handling Process
we asked the customer about some information and their the question and reply:-

 

·       The version of VCN500

  V100R002C10SPC100

·       The full network topology.

Attached simple network layout

·       Is it an installation or was it working before.

 

It is the first time to make NVR get accessed from external.

 



then we sent the solution to the customer that he has to make NATTING on the interface of his router with his puplic and private IP.


and also he needs to configure the VCN with the public IP on the NAT IP as the picture below.




and after we made this we checked with the customer and he become able to access the VCN500 through internet.

END