No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to connect power adapter for

Publication Date:  2017-12-05 Views:  168 Downloads:  0
Issue Description

- At the camera installation phase we found that power adapters socket is different from the power  built in socket in the camera 

- it cannot connect to the camera directly as appear on below pictures 




Handling Process

- checked the installation guide to confirm How the power input connect to the camera 



- so to connect the power cable on that way the adapter cable should be cutted , there are two wires that two wires are connected to the camera 

- first step is to cut the cable of the adapter you will find 2 wires inside the adapter cable 

- connect the two wires to camera socket as mentioned on the installation guide picture 

- confirm that camera powering on normally 

Solution

- checked the installation guide to confirm How the power input connect to the camera 



- so to connect the power cable on that way the adapter cable should be cutted , there are two wires that two wires are connected to the camera 

- first step is to cut the cable of the adapter you will find 2 wires inside the adapter cable 

- connect the two wires to camera socket as mentioned on the installation guide picture 

- confirm that camera powering on normally 


END