No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Source NAT <address pool >under vsys

Publication Date:  2017-12-05 Views:  137 Downloads:  0
Issue Description
when the customer tried to configure source nat under vsys and configure a nat address pool he found the following "the specified global ip cannot be used by the current sys item" 
the public ip he used 37.76.230.114
=======================================================================================================================


Alarm Information


Handling Process

Procedure

  1. Choose System > Virtual System > Virtual System.

Click the IP Address Settings tab. Then allocate the public IP addresses for the virtual system as required.

The public IP <37.76.230.114> address allocated to the virtual system is applied to the NAT, NAT Server, and interface.

Root Cause

<37.76.230.114> is not added under the resources of the virtual system

Solution

Procedure

  1. Choose System > Virtual System > Virtual System.

Click the IP Address Settings tab. Then allocate the public IP addresses for the virtual system as required.

The public IP <37.76.230.114> address allocated to the virtual system is applied to the NAT, NAT Server, and interface.

Suggestions

Procedure

  1. Choose System > Virtual System > Virtual System.

Click the IP Address Settings tab. Then allocate the public IP addresses for the virtual system as required.

The public IP <37.76.230.114> address allocated to the virtual system is applied to the NAT, NAT Server, and interface.

END