No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to create and configure VLANs on the ONTs Ethernet ports

Publication Date:  2017-12-12 Views:  482 Downloads:  0
Issue Description



Based on the customer network topology, he wants to create:

-  one VLAN assigned to LAN Ethernet Port 1/2
-   one VLAN assigned to LAN Ethernet Port 3


If this is possible, would it also be possible to create a rule where one or few computers, based on MAC address, can have access from one VLAN to the other?



Solution



For your scenario, you have to configure the ONT through the OLT CLI and the Web page.

·       On the OLT MA5600T CLI :

Step 1: Create a service-port for each vlan

MA5600T(config)#service-port vlan   110 gpon  0/2/4 ont  4  gemport   12 multi-service  user-vlan  105

{<cr>|bundle<K>|inbound<K>|rx-cttr<K>|tag-transform<K>|user-encap<K>}:


Command:

service-port vlan   110  gpon 0/2/4 ont  4  gemport  12  multi-service  user-vlan 105

MA5600T(config)#service-port vlan   110 gpon  0/2/4 ont 4  gemport 13  multi-service  user-vlan  110

{<cr>|bundle<K>|inbound<K>|rx-cttr<K>|tag-transform<K>|user-encap<K>}:


Command:

   service-port vlan   110  gpon 0/2/4 ont 4  gemport  13 multi-service  user-vlan   110


Step 2: Set the native-vlan value that you want for each ONT eth port


MA5600T(config-if-gpon-0/2)#ont port native-vlan 4 4 eth 1  vlan  105

{ <cr>|priority<K> }:

  Command:

  ont port native-vlan 4 4 eth 1  vlan   105


MA5600T(config-if-gpon-0/2)#ont port native-vlan 4 4 eth 2  vlan 105

{ <cr>|priority<K> }:

Command:

   ont port native-vlan 4 4 eth 2  vlan  105


MA5600T(config-if-gpon-0/2)#ont port native-vlan 4 4 eth 3  vlan 110

{ <cr>|priority<K> }:

  Command:

     ont port native-vlan 4 4 eth 3  vlan  110


MA5600T(config)#display  service-port port  0/2/4 ont 4 

{ <cr>|gemport<K>|sort-by<K> }:

  Command:

   display   service-port port  0/2/4 ont 4 
 

Switch-Oriented Flow List

  -----------------------------------------------------------------------------

   INDEX VLAN VLAN     PORT F/ S/ P VPI  VCI  FLOW  FLOW       RX  TX   STATE

              ID   ATTR   

TYPE                    TYPE  PARA

-----------------------------------------------------------------------------

    15  105 common  gpon 0/2 /4  4    11   vlan  105        -   -    up

    16  110 common  gpon 0/2 /4  4    12   vlan  105        -   -    up

    17  110 common  gpon 0/2 /4  4    13   vlan  110        -   -    up

-----------------------------------------------------------------------------

   Total : 3  (Up/Down :   3/0)

MA5600T(config-if-gpon-0/2)#display  ont port attribute     4 4   eth  1

-------------------------------------------------------------------------



  ONT ONT  ONT      Auto-neg Speed  Duplex Port   Flow   Native Priority

          port   port-type          (Mbps)        switch control VLAN           


-------------------------------------------------------------------------

  4   1   ETH       enable   auto  auto   on     off    105    0      

------------------------------------------------------------------------


MA5600T(config-if-gpon-0/2)#display ont port attribute 4 4 eth   3

-------------------------------------------------------------------------

  ONT ONT  ONT      Auto-neg Speed  Duplex Port   Flow   Native Priority

          port  port-type          (Mbps)        switch control VLAN           

-------------------------------------------------------------------------

  4   3   ETH       enable   auto  auto   on     off    110    0      

-----------------------------------------------------------------------

MA5600T(config-if-gpon-0/2)#display  ont port  attribute  4  4  eth

{ <cr>|ont-portid<U><1,8> }:

  Command:

  display  ont port  attribute  4 4  eth

-------------------------------------------------------------------------

  ONT ONT  ONT      Auto-neg Speed  Duplex Port   Flow   Native Priority

           port port-type          (Mbps)        switch control VLAN           

------------------------------------------------------------------------

  4   1   ETH       enable   auto  auto   on     off    105    0      

  4   2   ETH       enable   auto  auto   on     off    105    0      

  4   3   ETH       enable   auto  auto   on     off    110    0      

  4   4   ETH       enable   auto  auto   on     off    1      0      

------------------------------------------------------------------------


Step 3: Apply the static mac-address:


MA5600T(config)#mac-address static service-port 15 40B0-34EA-36A6  

MA5600T(config)#mac-address  static  service-port   16 40B0-34EA-36A7   

 

·       On the ONT Web page :


Step 1: Log in to the Web configuration page.

a. Configure the IP address of the PC network adapter to be in the same network segment with the IP address of the local maintenance Ethernet port on the ONT.


b. Open the Web browser, and enter the IP address (https with high priority is recommended) of the local maintenance Ethernet port on the ONT. In the login window that is displayed, enter the user name and password of the administrator. After the password is authenticated, the web configuration window is displayed.

Step 2: Configure the working mode of a LAN port.



The LAN port bound to the WAN port must work in the Layer 3 mode. Therefore, set the working mode to Layer 3 for the LAN port connected to the PC.

Step 3: Configure parameters of a WAN port.

 Step 4: Check the ONT connection status.

 As I have explained to you above, you also need to configure the vlans on OLT to make this configuration works. Also you need two WLAN IP addresses


END