No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Activate two additional routed ports on NE20 2x10GE

Publication Date:  2018-02-06 Views:  62 Downloads:  0
Issue Description

Below is a sample of display license command and the two Gigabit interfaces that needs to turn into 10GE interfaces.

<HUAWEI> license active license.dat

[~rt-pe-ffm-5]display license
 Active License    : cfcard:/lic2.dat
 License state     : Normal
 Revoke ticket     : No ticket

 No relevant customer information

 Product name      : NetEngine 20E
 Product version   : V800R008
 License Serial No : LIC2017110864HNXX
 Creator           : Huawei Technologies Co., Ltd.
 Created Time      : 2017-11-08 09:26:32
 Feature name      : CRFEB2
 Authorize type    : comm
 Expired date      : PERMANENT
 Trial days        : 60


 Item name          Item type      Value      Description
 -------------------------------------------------------------
 LCR2S30ACTP02      Function       YES        NE20E-S2F Enable Fixed Interface 2*10GE License

 Master board license state: Normal.
[~rt-pe-ffm-5]

 

[~rt-pe-ffm-5]display interface brief

...
GigabitEthernet0/0/0        up    up        0.01%  0.01%          0          0
GigabitEthernet0/1/0(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/1/1(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/1/2(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/1/3(10G)   down  down         0%  0.01%          0          0

GigabitEthernet0/3/0(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/3/1(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/3/2(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/3/3(10G)   down  down         0%  0.01%          0          0
GigabitEthernet0/3/4        down  down         0%  0.01%          0          0
GigabitEthernet0/3/5        down  down         0%  0.01%          0          0

GigabitEthernet0/3/6        down  down         0%  0.01%          0          0
GigabitEthernet0/3/7        down  down         0%  0.01%          0          0

Solution
After the client activates the license the ports do not display 10GE ports and remain as Gb ports. This happens becase the ports display (10G) behind the port name only when a 10G SFP+ module is inserted.

Without a module there is no (10G) info displayed:

[~rt-pe-ffm-5]display interface brief
...
GigabitEthernet0/1/3(10G)   down  down         0%     0%          0          0
GigabitEthernet0/3/0(10G)   down  down         0%     0%          0          0
GigabitEthernet0/3/1(10G)   down  down         0%     0%          0          0
GigabitEthernet0/3/2(10G)   down  down         0%     0%          0          0
GigabitEthernet0/3/3(10G)   down  down         0%     0%          0          0
GigabitEthernet0/3/4        down  down         0%     0%          0          0
GigabitEthernet0/3/5(10G)   down  down         0%     0%          0           0

GigabitEthernet0/3/6        down  down         0%     0%          0          0 

END