No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The disk is not recognized and cannot create RAID in Raid Controller on RH2288H V3

Publication Date:  2018-03-01 Views:  34 Downloads:  0
Issue Description

The disk is not recognized and cannot create RAID in Raid Controller on RH2288H V3.

Alarm Information

 The problem is that when try to create the disks in the raid controller, can’t see the disks or create a raid , the disks is not showing up when try to install the OS.

 

 

 

 

 

Handling Process

After checking the logs , there no hardware issue was discovered. The Raid Card was installed into the server after the server was received without a Raid Card inserted.

The Raid Card is compatible with the server RH2288H V3 , so , this is not the issue.

 

Root Cause

Even if suggest to install the drivers when installing the OS it will not work, because the main problem is that the Raid Card is nor properly inserted into the server.

Solution

Check the cables in order to be sure that the Raid Card is correct inserted.

On below picture is clearly that the Card is not properly inserted in order to recognize the Disks.

 

 

Suggestions

The suggestion is to use the cable connectivity position according to the Huawei Raid Controller Procedure:

 

END