No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU

How to associate 1 IMSI to 1 APN

Publication Date:  2018-03-05 Views:  19 Downloads:  0
Issue Description

To associate an user to a different pool, you must create two different APNs. After that you should bind manually the users on UDC, as below:  ,

Since it is not allowed to select the Access Point Name, you should write manually the APN's name. 


ADD IPPOOL: POOLNAME="Test"; 

ADD SECTION: POOLNAME="Test", SECTIONNO=0, SECTIONTYPE=DYNAMIC, STARTIP="x.x.102.1", ENDIP="x.x.102.254"; 
ADD SECTION: POOLNAME="Test", SECTIONNO=1, SECTIONTYPE=DYNAMIC, STARTIP="x.x.103.1", ENDIP="x.x.103.254"; 
 

ADD APN:APNNI="td-tech.com",MAXBANDWIDTH=2048,DNSIND=DNS_IND_SET_ON,IPV4PRIMARY="x.x.61.250",IPV4SECONDARY="x.x.61.254";

ADD APN:APNNI="td-tech.com2",MAXBANDWIDTH=2048,DNSIND=DNS_IND_SET_ON,IPV4PRIMARY="x.x.61.250",IPV4SECONDARY="x.x.61.254";

 

ADD APNADDRPOOL:APNNI="td-tech.com",POOLNAME="Test";

ADD APNADDRPOOL:APNNI="td-tech.com2",POOLNAME="Test2";

Solution


END