No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to create eLTE to PSTN interface

Publication Date:  2018-03-22 Views:  51 Downloads:  0
Issue Description

The customer counts with a PBX device (U1911),and needs to know if it’s possible to do it without this PBX or in case to be necessary to use the PBX, needs to know which kind of requirements are needed to do it.

The customer counts with a  PBX device (U1911), and needs to know if it’s possible to do it without this  PBX or in case to be necessary to use the PBX, needs to know which kind of  requirements are needed to do it.

After add U1911 ,there have some alarm and sip link failed. the customer want solve it ,and test call business from eLTE to U1911.

Alarm Information

 

 

Handling Process

1. Check the data configuration on both sides to ensure that the SIP link is normal.


2.Check the number rule configuration on both sides to ensure that the access authority of both sides is normal.

Root Cause

configuration problem

Solution

1.The eLTE side is configured with both PSTN and SIP gateways, and the SIP configuration needs to be preserved and PSTN configuration removed.

 


2. Each side is configured with the other's number rules, and the eLTE side cannot have the account number of the other party's number.





END