No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

How to configure the qos to take effect at a fixed time?

Publication Date:  2018-04-30 Views:  298 Downloads:  0
Issue Description

How to configure the qos to take effect at a fixed time?

Solution

The demo is like below, the key is the time-range configuration.

 [Huawei]time-range workday 8:00 to 18:00 working-day 

[Huawei]acl 3000 [Huawei-acl-adv-3000]rule permit ip source 10.1.1.0 0.0.0.255 time-range workday 

[Huawei-acl-adv-3000]rule permit ip source 10.1.2.0 0.0.0.255

[Huawei]traffic classifier c1

[Huawei-classifier-c1]if-match acl 3000

 

[Huawei]traffic behavior b1

[Huawei-behavior-b1]car cir 384 pir 768 green pass yellow pass remark-dscp 0 red discard

 

[Huawei]traffic policy test  

[Huawei-trafficpolicy-test]classifier c1 behavior b1

 

[Huawei]int GigabitEthernet 0/0/1 

[Huawei-GigabitEthernet0/0/2]traffic-policy test inbound


END