No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HG8245Q2- which TR069 nodes allow to bind all the 5GHz SSIDs to a WAN PPP Connection

Publication Date:  2018-06-27 Views:  275 Downloads:  0
Issue Description

The customer is using softw version V3R017C10S100 for his HG8245Q2 ONT.

 

He is specifically looking for the parameter name that would allow to bind all the 5GHz SSIDs to a WAN PPP Connection.

The below is a snippet from the test TR069 server. Under this object (the bold text in the pic),  4 LAN ports and 4 SSIDs are seen. These 4 SSIDs are for 2.4GHz. There should be 4 more SSIDs for 5GHz that customer should be able to bind to the WAN connection as you can do that from the web interface of the ONT.

 

 

The customer is not able to find the parameter name for these additional 4 SSID.

Solution

For R17C10 we do not use the HW_LANBIND anymore:

We use InternetGatewayDevice.Layer3Forwarding.X_HW_policy_route.1.PolicyRouteType, for example add an new OBJ bind LAN1 LAN2 SSID1 to wan1.2.ip1

InternetGatewayDevice.Layer3Forwarding.X_HW_policy_route.1.PolicyRouteType:SourcePhyPort

InternetGatewayDevice.Layer3Forwarding.X_HW_policy_route.1.WanName: wan1.1.ip1

InternetGatewayDevice.Layer3Forwarding.X_HW_policy_route.1.PhyPortName:LAN1,LAN2,SSID1

 

Before we add this rule. We should change the LAN to layer3 mode and SSID no need to.
For example LAN1 LAN2:

InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2.X_HW_L3Enable 
// 1 means layer3  0 means layer2 and layer2 cannot bind to wan

 

WAN name refer to the TR069 node:

If wan path is InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1. thenwan name is wan1.1.ip1



END