No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How Can I Configure the Network-side VLAN and QinQ VLAN on the ME60 Running V100R006

Publication Date:  2018-09-26 Views:  160 Downloads:  0
Issue Description
How can I configure the network-side VLAN and QinQ VLAN on the ME60 running V100R006?
Solution
Run the mode user-termination command on the main interface to set the interface mode to user termination mode. The configuration of a single-tagged VLAN and double-tagged VLAN is described as follows:

1. Configure a single-tagged VLAN sub-interface.

Run the control-vid vid dot1q-termination command to set the VLAN ID of the sub-interface for single VLAN tag termination. Run the dot1q termination vid low-pe-vid [ to high-pe-vid ] command to configure the range of VLAN IDs terminated on the dot1q VLAN tag termination sub-interface.

Run the arp-proxy inter-sub-vlan-proxy enable command to enable proxy ARP on the sub-interface. Run the arp broadcast enable command to enable ARP broadcast on the sub-interface.

2. Configure the sub-interfaces for QinQ VLAN tag termination to support proxy ARP.

Run the control-vid vid dot1q-termination command to set the VLAN ID of the QinQ VLAN tag termination sub-interface. Run the qinq termination pe-vid pe-vid ce-vid low-ce-vid [ to high-ce-vid ] [ vlan-group group-id ] command to configure the range of VLAN IDs terminated on the QinQ VLAN tag termination sub-interface.

Run the arp-proxy inter-sub-vlan-proxy enable command to enable proxy ARP on the QinQ VLAN tag termination sub-interface. Run the arp broadcast enable command to enable ARP broadcast on the QinQ VLAN tag termination sub-interface.

Note: The mode of a main interface with sub-interfaces cannot be modified directly. To modify the mode, delete all the sub-interfaces first.

END