No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How Can I Restart the 10GE Network Adapter of the N8500 Clustered NAS Storage System

Publication Date:  2018-10-17 Views:  124 Downloads:  0
Issue Description
How can I restart the 10GE network adapter of the N8500 clustered NAS storage system?
Solution
The connectivity between the N8500 clustered NAS storage system and the 10GE network may be interrupted by problems such as an intermittent disconnection in optical fibers. To resolve the issue, you can restart the 10GE network adapter by performing the following steps:

1. Log in to the primary node of the clustered NAS engine using the support user account.
Note:
The following describes how to restart network port eth0 on a 10GE network adapter. Other network ports can be restarted in the same way.

2. Run the ifdown eth0 command to disable network port eth0.

3. Run the ifup eth0 command to enable network port eth0.

END