No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

board LPUF-10 displayed like TSU in NE40E

Publication Date:  2013-04-04 Views:  93 Downloads:  3
Issue Description
New LPUF-10 board in slot 3 on NE40E-X3 with software
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.70 (NE40E&80E V600R001C00SPCe00)
Copyright (C) 2000-2011 Huawei Technologies Co., Ltd.
HUAWEI NE40E-X3 uptime is 0 day, 1 hour, 35 minutes
NE40E-X3 version information:

displayed like TSU
no alarms, can find only in:
NE40E-X3's Device status:
Slot # Type Online Register Status Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 LPU Present Registered Normal NA
2 LPU Present Registered Normal NA
3 TSU Present Registered Normal NA
4 MPU Present Registered Normal Slave
5 MPU Present NA Normal Master
6 CLK Present Registered Normal Slave
7 CLK Present Registered Normal Master
8 PWR Present Registered Normal NA
9 PWR Present Registered Abnormal NA
10 FAN Present Registered Normal NA
Handling Process
check bar-code and check photos of board we submit that board is LPUF-10
display device slot 3:
Slot 3's detail information:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Description: Service Processing Unit - TSU
Board status: Normal
Register: Registered
Uptime: 2012/11/20 08:12:56
CPU Utilization(%): 7%
Mem Usage(%): 21%
Clock information:
State item State
Current syn-clock: 5
Syn-clock state: Locked VCXO_OK REF_OK
Syn-clock 4 state: Actived
Syn-clock 5 state: Actived
Statistic information:
Statistic item Statistic number
SERDES interface link lost: 0
MPU switchs: 0
Syn-clock switchs: 1
Configure license items:
NULL

Also software version look like normal LPU is:

TSU 3 : uptime is 0 day, 1 hour, 30 minutes
StartupTime 2012/11/20 08:12:56
Host processor :
SDRAM Memory Size: 1024M bytes
Flash Memory Size: 32M bytes
Network processor :
1. RDRAM Memory Size: 96M bytes
2. SRAM Memory Size: 36M bytes(ingress)
1. RDRAM Memory Size: 192M bytes
2. SRAM Memory Size: 27M bytes(egress)
LPU version information
PCB Version : CR53LPUF REV B
EPLD Version : 102
FPGA Version : 109
NAPA Version : 401
NP Version : 048
BootROM Version : 146.0
BootLoad Version : 88.0
FSURTP Version : Version 2.1 RELEASE 0372
FSUKERNEL Version : Version 2.1 RELEASE 0372
EFURTP Version : Version 2.1 RELEASE 0372
EFUKERNEL Version : Version 2.1 RELEASE 0372
TM Version : 500
TCM version information
PCB Version : CR53TCMB REV B
MonitorBUS version information:
PCB Version : CR31MBSA REV A
EPLD Version : 019
Software Version : 3.15
Configure license items:
NULL
Root Cause

board type was setted by mistake

Solution
need to set board-type in hide-mode and reboot device:
[NE40E]_h
[NE40E-hidecmd]set board-type slot 3 lpu ...
<NE40E>save
<NE40E>reboot
......
<NE40E>display device
NE40E-X3's Device status:
Slot #    Type       Online    Register      Status      Primary   
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1         LPU        Present   Registered    Normal      NA        
2         LPU        Present   Registered    Normal      NA        
3         LPU        Present   Registered    Normal      NA   

Suggestions
it's not critical error. if saomeone worry about this issue, just set board-type in hide mode.

END