No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ - Can All Multiple VRRP Backup Groups Under a Subinterface Be Associated with the Admin-VRRP

Publication Date:  2013-09-25 Views:  58 Downloads:  0
Issue Description
Can all multiple VRRP backup groups under a subinterface be associated with the admin-VRRP?
Handling Process
None
Root Cause
None
Solution

All multiple VRRP backup groups under a subinterface cannot be associated with the admin-VRRP.

Configurations of an subinterface:

#
interface GigabitEthernet3/0/10.1
 control-vid 1 dot1q-termination
 dot1q termination vid 20
 ip address 192.168.1.X 255.255.255.0
 ip address 19.168.1.X  255.255.255.0 sub
 vrrp vrid 20 virtual-ip 192.168.1.21
 vrrp vrid 20 track admin-vrrp interface Eth-Trunk15 vrid 10
 vrrp vrid 30 virtual-ip 19.168.1.21

In V3R3C02 697, the following message is displayed:

[R2-NE40E-GigabitEthernet3/0/10.1]vrrp vrid 30 track admin-vrrp int eth 15 vrid 10
Error: The specified member VRRP has been configured on the interface

In V6R3C00, the following message is displayed:

[R4-NE80E-GigabitEthernet1/0/0.1]vrrp vrid 30 track admin-vrrp int eth 12 vri 10
Error: A member VRRP is tracking an administrator VRRP on this interface 
Suggestions
Do not associate multiple VRRP backup groups under a subinterface with the admin-VRRP.

END